There are a considerable number of cases scalding injuries and deaths every year around the world from the faucet water. Our skin has a narrow range of tolerable temperature before getting damaged, and so many what is the normal temperature of faucet water?
Most faucets (including our best vintage faucets) will have a water temperature chart indicating the recommended water temperature. This is a requirement by law in some states.
However, regular water tap temperature will depend on many factors. For instance, if the water is pumped from a well, its temperature will be somewhere between 50 and 55 degrees Fahrenheit, which is an average temperature of the ground. But if the water is from surface water, like a dam, lake, or river. The temperature will vary depending on the season – warmer in summer and cold in the winter. But the temperature will be slightly over the actual temperature of the water source.
In winter, the water temperature will drop, but that is until ice covers the surface of the water in a lake or river. It is a bit of Chemistry, but this anomaly will result in water temperature increasing in the colder season. When water travels through the pipes to your home, it will again heat up slightly due to the underground temperature. But when the water reaches the surface, it becomes cold.
Another determinant is time and location.
If your house is near the water reservoir, the temperature of the water tap will not increase significantly beyond the temperature of the source.
How long the water stays in the pipes in a warmer home environment will also affect its temperature. Also, you need to make sure you don’t have a broken faucet which could have multiple problems.
So what is the normal temperature of tap water? It depends on what type of water you want. For cold faucet water, the temperature should be somewhere between 44 degrees Fahrenheit while hot faucet water should be around 122 degrees Fahrenheit.
There is no ‘normal’ faucet water temperature, and it comes down to your location and season, plus how deep the pipes transporting water are in relation to the surface. But the rough estimate is 44°F for the cold and 122°F for hot.
Perhaps another obvious factor is the type of plumbing nut there isn’t much (is any) effect from a bar or sink faucet. However, you are likely to get chilled tap water if the pipes carrying water in your hose are hidden within the walls, and have hot water in the taps if the pipes are exposed to the sunlight.
How to filter your faucet water
Tap water is never a hundred percent clean and free of impurities; that is why it is important always to have a water filtration system in your faucets. An effective water filter can help your household access unspoiled water that lacks any chemicals, odors, lead as well as other toxic substances.
However, before you buy a faucet filter, there are a few things you need to understand about the water filtration method. There are four types of water filters you can use in your home, and they include:
Faucet water filters ensure that you have clean, healthy drinking water without spending too much. They are pretty easy to install and are more than effective at getting rid of all the contaminants from your household water, including chlorine, which is prevalent in municipal water.
On-counter filters are usually mounted directly on the kitchen counter and directly link to the faucet. With a built-in switch, you can switch between unfiltered and filtered water whenever you want.
Pitcher water filtration system contains activated carbon filters that not only filter water but also improve its taste and odor. These filters are usually inexpensive and can fit inside most refrigerators easily.
These types of water filters are installed under the sink and connected directly to the waterline. Unlike other types of filters, under-sinks are usually pretty expensive though they are relatively low-maintenance.